power torque torque wrench instructions

28/02/2021

BACK

KING TONY products are in line with DIN-ISO 6789 to the Premier conditions, coupled with in order to avoid the human factor, the product with automated machines make three correct, torque wrench to ensure the quality. Otherwise this will jeopardize the accuracy of the torque values. Specifications ・ Conforms to Standards: IEC 60900:2004 ・ Country of Manufacture: Taiwan - In order to improve the product, the above specifications may change without notice. Moreover, you force more, the beam goes up. It should never be used to break loose stubborn fasteners. It ensures how much pressure do you need to tighten the bolts or nuts. Price And Quantity. Otherwise this will jeopardize the accuracy of the torque values. How to choose the right size of torque wrench? Easy input of the target torque values via 4 button foil keys next to the big LCD-display. You can make it. Always power digital torque tool ON prior to applying torque. A torque wrench is intended to tighten up nuts and bolts with preset torque indications. Power Transmission Pumps Raw Materials Reference and Learning Supplies Safety Security Test Instruments ... Torque wrenches allow for a specific torque (amount of force) to be applied to a fastener (such as a nut or bolt) so that the fastener is not damaged by overtorquing or loosened over time due to undertorquing. Avoid bumping or shocking the wrench when being used. read more... Tool House. When done with the torque wrench, position the scale back in it’s lowest position. Every Power Torque tool must pass a series of state-of-the-art tests to for hardness, strength, and performance and are guaranteed … Torque Tester. Load the wrench to full scale torque within +/- 1% of the torque value shown on the indicator, then release the torque from the torque wrench (Note: indicator and wrench retain the peak readings). A click torque wrench is generally used in automobiles and uses for tightening the nuts and bolts. It damages your bolts. Riding on unfathomable volumes of industrial expertise, we are engaged in offering an excellent assortment of Manual Torque Wrenches Open Jaw Fixed Head Type. Snap-on Torque Wrench User Manual Find solutions to your mastercraft torque wrench instructions question. These tools typically look like a socket wrench with mechanisms inside. You can apply the force to pull the tool with clockwise. Poka-yoke torque wrench prevents over-torque, as a click wrench cannot; Calibration life 2x ISO standards, unmatched by any wrench; Delivers repeatability, traceability and precision for all tightening applications; Preset wrench ensures that the correct torque value is consistently applied to each fastener; Industry leading warranty: 2 years unconditional. You should clean the wrench for the next use. Every hydraulic torque wrench has a large hole for adjusting with the nut. When you keep tightening the bolts, you may hear a click sound to your ear. Rotate the torque wrench until the it clicks. Torque Checker . You can easily identify from the manufacturer manual. Failure to follow all instructions could result in … The deflecting beam wrench is designed for the coil spring method. You can save the reading with the attached memory stack and access to your computer. However, it allows the measured pressure, better safety, prevent over-tightening and damaging and accuracy. Always pull the Digital Torque Wrench towards you. Three LED units report the … Ok Submit This Form 1/2-in drive manual torque wrench delivers 50 ft. Of torque for greater precision when tightening screws or bolts Clicking sound and pulse in the handle alerts user when torque value is reached, preventing over-applying torque Reversible ratcheting head allows you to torque left and right-hand fasteners. The Camovertechnology completely avoids over-tightening. While the torque is used, the scale gives a reading which indicates the weight of the product. They are made having a fixed socket head and the length adjusting rod. Be careful about the overtightening which can damage or break down the bolt. It has a roller ball and mechanism is cam. If you need a smaller fastener, socket with a 3/8 inch drive is very common. Here I have a 3/8” drive inch pound torque wrench that goes from 50 to 250 inch pounds. If you are in a project with the torque wrench, you can try to operate with this information. When you hear the click sound, you just atop the tightening because it already goes to the required torque. The self-contained torque limiting mechanism employs an exclusive, patented design that minimizes friction, and is rugged and dependable. To confirm the torque value and or accuracy of manual torque tools, also equipped … The lever arm has some elasticity allowing the wrench to bend the desired level of pressure. Do not attempt to increase leverage of this wrench with any other device. A torque wrench is a very precise piece of equipment, therefore four tips you should know about ownership is never drop them, do not use them as a johnson bar to loosening tight fasteners, always keep them clean, and return the scale to it’s lowest torque range. The beam wrench is the lowest cost torque wrench among the other types of a torque wrench. Avid Power 20V MAX Cordless Impact Wrench with 1/2"Chuck, Max Torque 330 ft-lbs (450N.m), 3.0A Li-ion Battery, 4Pcs Driver Impact Sockets, 1 Hour Fast Charger and Tool Bag, Avid Power 4.6 out of … Step 1. You should set the torque with zero to the specific number of torque. The KTC GEK085-W36E Digital Adjustable Torque Wrench expands torque applications to places where a socket wrench cannot work. This Kobalt 1/2-in. How To Adjust Torque Wrench : Apprentice to Pro Guide. The torque wrench is designed by Conrad Bahr in 1918. The socket engages the nut and, with the reaction arm contacting a solid surface, the tool drives the nut to its torque and then shuts off. If your torque level is 100, you should specify to 100 with zero. The products serves the purpose of tightening the screws in the most appropriate and perfect manner. Now you should attach the socket with your torque. Its build quality is also pretty good as it uses steel for its construction that results in a … Did you make this project? The torque output is adjusted by controlling the air pressure. That usually recorded next to the screw or indicated in the instructions. Designed for torque auditing and measurement applications and an alternative solution to a digital wrench for performing a quick visual torque … You must try to tightening in a criss-cross pattern. To adjust your torque wrench, loosen the cap on the bottom of the handle by turning it counterclockwise. Sideloading the wrench defeats the purpose of using a torque wrench. When it is shown the red signal, you should stop the wrench and go for the next bolt. At first, you set the torque level. “No hub” wrench torque is used by plumbers. Do not push. You should be able to hear, feel and see the click. 27. In the opposite case, if the torque power wasn’t enough, the piece will be unsafe and come off with use, and your equipment can break down, fall apart, or even cause accidents. 1 foot is equal to 12 inches, therefore 20 multiplied by 12 is 240. The Click torque wrench is one kind of socket wrench where it can operate to preset the torque level with the clutch mechanism. When the beam wrench is not used, the indicator remains parallel with the lever arm. A torque wrench is designed to indicate when a particular torque specification has been reached by giving an audible ‘click’ ‘beep’ and/or tactile feedback through the handle. It comes for the large industrial bolt. Wind turbine OEMs provide plenty of guidelines and instructions for tightening the bolts on their equipment. TORQUE WRENCH OPERATOR’S MANUAL • At low torque settings, pull wrench slowly to observe click. All Power Torque Tools are manufactured to meet or exceed U.S. government and American National Standards Institute specifications. At first, you attach the hose to the power pack and then you attach this part with the hydraulic torque wrench. This vehicle which is a 1998 Ford Ranger, the wheel torque spec values is 100 foot pounds. Now to set the torque wrench. The high repeating accuracy with a tolerance of ±4% makes the SWR wrenches ideal for assembly lines for … Stay up to date with my latest tutorials, don't forget to FOLLOW my profile and be sure to check out my YOUTUBE page as well for all your DIY needs. The beam wrench I the simple and basic type of torque wrench where the head and the handle of the wrench are separated by a lever arm. Product Code : 35 . Now you can set the battery on the battery box and tighten the screw. Generally, you can set a 10% tolerance that can signal to you in red or green. DWT-200 torque tester automatically captures the peak down torque, when the torque … Industrial Grade Digital Torque Wrench Ideal for Quality Inspections Robust and durable aluminum body. The plumber’s wrench is a T-shaped wrench which is being used with couplings on the soil pipes. 17-32 of over 1,000 results for "power torque wrench" Cordless Impact Wrench - GOXAWEE 20V Electric Impact Driver (4.0Ah Battery, Brushless Motor, 1/2 & 1/4 Inch Quick Chuck, 2-Speed, Tool Bag) - High Torque Impact Kit for Home & DIY Project. The torque wrench increases the rational force to tighten a bolt or screw or nut with more accuracy than a standard wrench. Do you know how much torque needed to tighten the nuts? Some companies put a "flex head" on their torque wrenches. You roll the handle to set the torque. The tool offers a non-reactive, torque controlled option for hex bolt installation. It is important for perfect tightening to the bolt. That makes sideloading the wrench easier, not harder. torque range) could cause breakage or lose accuracy. Find here Torque Wrench suppliers, manufacturers, wholesalers, traders with Torque Wrench prices for buying. electronic torque wrench ELOTRONIC 2420. A Complete Guide with Picture, 5 Best Padlocks for Gates and How to Select. #For Torque wrenches up to TM 250/TM 250R *Specifications are subject to change without any prior notice. The hydraulic torque is designed for applying the torque speed. GET A PRICE/QUOTE ASK A QUESTION Send Inquiry. You set the digital torque wrench with bolt and you should pull the wrench with clockwise. Both also have readings on the opposite side of newton meters too. The inch pound torque wrench does not read in foot pounds, so a simple conversion is needed. There are two types of hydraulic torque wrench which names are square drive and low profile. It has three-part like a hose, a power pack, and a hydraulic torque wrench. It keeps the balance of your car tire. The Power Tool Adapter Kit allows you to test powered torque tools such as power screwdrivers with the UTWCS. It has pre-calibrated to slip whether the torque strength is reached to a sufficient level. Contact Supplier Request a quote. These require manual labor in order to be … Align the number line on the handle with the center line on the barrel, so considering this is 100 foot pounds, the handle number line will be zero. Three LED units report the result of the tightening process: range (green) and above the tolerance range (red). Features: • Rust-free. About: Car enthusiast YouTuber creating helpful tutorial videos on both repairs and customizations. A torque wrench is a tool that applies a specific amount of torque to a fastener (typically a nut or a bolt). Every Power Torque tool must pass a series of state-of-the-art tests to for hardness, strength, and performance and are guaranteed against defects in materials and workmanship. It deals the high accuracy and safety when it deals with a high level of torque pressure. So, now we have a little idea about wrench torque. The hydraulic torque wrench comes with three-part like a hose, a power pack, and a hydraulic torque wrench. Required fields are marked *. The torque wrench is a surprisingly delicate tool prone to losing calibration or even breakage. Make your measurement in inches and for easy calculations, use a whole number. Once it goes to the required torque level, it will automatically stop to move the bolt. You follow the easy five steps to use the beam type torque wrench. The whole reason for using a torque wrench is to create accurate and repeatable torque application results. Some wrenches have a preset torque that is set by the manufacturer while other … When you want to use the torque wrench, you must read the manufacturer installation book. You need to pull smoothly. Page 1 Torque Wrench ProducName Description Westward micrometer torque wrench is a precision instrument designed to accurately measure torque. Fro safety issue, you should set the fittings with a solid connection between the three parts. A torque wrench, as the name suggests, is a wrench used to apply a specific torque to a fastener such as a bolt or a nut. When you set the wrench with filling the battery, you are now able to use the digital torque wrench. When you applied to pressure on nuts or bolts head, the pre-calibrated torque can work for tightening the nut. Get it as soon as Fri, May 8. When done with the torque wrench, position the scale back in it’s lowest position. Until you can fastener to the wrench, the beam goes evenly to see the wrench. When you store the wrench, you may keep oil upon the wrench so that it keeps better for the next work. Today we are going to share a complete guide of how to use a torque wrench. Tacklife is a highly popular brand of power tools that makes all kinds of products. Do I need to Calibrate Torque Wrench? Torque wrench at the factory calibrated to be done on the torque, torque wrench to ensure the quality. Basically, it is used in the automobile operation. Be careful, what type of click torque wrench should you buy? But you hold the wrench that the hand does not touch the beam. Ltd.” are a Private Limited Company based firm, engaged as the foremost manufacturer and exporter of Hydraulic Torque Wrench, Power Pack for Bolt Tensioner, Power Pack for Torquing, etc.Our products are high in demand due to their premium quality, seamless finish, different patterns and affordable prices. The DWT-200 Digital Torque Tester for Manual Wrenches is ideal for checking torque on manual torque wrenches up to 1,500 lbf-in with an accuracy of ± .5% F.S., ± 1 LSD. Avoid Damaging the Torque Wrench Do not use the Digital Torque Wrench to break a fastener loose. Industrial Bolting provides … You can know about the bolt or nut’s size. This Standard Click Type Torque Wrench is a special tool that is used to fasten nuts or bolts. You should use the click wrench slowly and carefully rather than quickly. Available only for 500 in-lb, 108 ft-lb and 260 ft-lb models only. The wrench features forged steel jaws and a unique power sensor in the handle which accurately detects and analyzes load applied to the grip, regardless of hand position. BT Electric Torque Wrench is designed to install heavy hex structural bolts. Our offered wrenches are used in repairing work. All Power Torque Tools are manufactured to meet or exceed U.S. government and American National Standards Institute specifications. Ltd.” are a Private Limited Company based firm, engaged as the foremost manufacturer and exporter of Hydraulic Torque Wrench, Power Pack for Bolt Tensioner, Power Pack for Torquing, etc.Our products are high in demand due to their premium quality, seamless finish, different patterns and affordable prices. Then it should be workable or tighten the nuts or bolts. Minimum Value (LO) In measurement mode display the last counter value by pressing A keys and press "MD" k triple. Generally, it is used for automobiles work. Clicking sound and pulse in the handle alerts user when torque value is reached, preventing over-applying torque. Next I have a 1/2” drive foot pound torque wrench that has a range of 30 to 150 foot pounds. Measure and mark the length to your reference point. Now you should set the tolerance level, just click on the percentage button. Just as an example I will set this to 230 inch pounds, therefore the 0 will need to be aligned on the handled. It has an audio effect when the torque is applied it creates an audio effect to the ear for high accuracy. Tightening/Assembly: To apply a specific amount of torque to tighten a fastener. This torque wrench is designed to tighten nuts with precision and with careful and considerate use, the wrench will give years of reliable service. When you attach the socket head over the fastener head. One may find the products under the category in the form of a socket wrench with a special mechanism that functions internally. The tool has a single socket with an integrated reaction arm. 28. Manual Torque Tools: Wrenches/Screwdrivers. Meets or … You can check the direction from the manufacturer manual. The specially designed jaws … Pre-load the torque wrench with 5 times of... 2. The ergonomic grip helps keep the torque point in the center of your hand. This torque works in only a single direction.Mechatronic and hydraulic torque wrench is also used in various ways. Video tutorial on how to use a torque wrench. A stain gauge sends a signal to the transducer which you can see the reading on the LED display. There are a few different styles of torque wrenches, but for this video I will be using a click type which is probably the most common. It works for high force vehicles. TORQUE WRENCH 239 power tool pdf manual download. Your email address will not be published. It ends tightening the bolt with specific torque ends with a click sound. Do not press ON/ZERO button while torque is being applied. An out of calibration torque wrench can cause part or tool. It has a serial port to be connected to a PC or printer for documentation of the achieved torque values. It should be a convertible. For this each of the bolts need to be torques to 20 foot pounds. Modern Traders - Traders of industrial tools, hand tools, industrial hand tools, precision hand tools, high precision tools, torque wrenches, torque drivers, torque multipliers, torque meters, refrigeration tools, measuring instruments, tonichi power torque tools, tonichi manual torque tools, tonichi torque measuring instruments, industrial air tools, force hand tools. Torque must be applied at 90 degrees to the fastener. to 100 ft. lbs. These wrenches … FREE Shipping by Amazon. While the screw or blot becomes tighter, you should turn slowly. Always dial the wrench back to zero (never below zero) when you’re done with it. You should monitor the pressure. At the end of the gearbox, a reaction device absorbs the torque and allows the tool operator to use it with very little effort. Other types include a beam type, dial, digital, slipper, and, no hub. We provide DELIVERY, PICK-UP and SAFETY TRAINING. 99. We are emerging as the promising manufacturer and supplier of Manual Torque Wrenches. You can hold the wrench on the end of the wrench. The bean may change the location from zero to 10, 20, 30 till 100. A fyi, the CdnTire torque wrench has a lifetime warranty. Always turn the wrench on so the applied torque is measured. You can see the square drive on one end. Tighten fasteners in two steps —first to half torque and then to final torque. When you use a larger socket, you can use the ½ inch drive. ・Be sure to practice inspection of tools at each use, … Manual Torque Wrenches << Previous . You see the torque level on the display. IMPORTANT SAFETY INFORMATION ENCLOSED. Now you should release the bolt and go for another bolt. Sep 26, 2017 Buy and use a torque wrench set to prevent common over-tightening problems and avoid expensive fixes later. on Introduction, Excellent: Very informative and easy to follow./////thank you so much AG. Step-1: Assemble the three parts. The point at which you hear or feel this can be changed by dialling in the desired amount of torque on the handle of your torque wrench. Share it with us! READ THIS MANUAL BEFORE OPERATION. You must monitor the movable handle to continue to adjust the torque level. A pneumatic torque wrench is a planetary torque multiplier or gearbox that is mated to a pneumatic air motor. The hydraulic torque wrench has adjustable settings that you can set the required torque level. If you overtighten the piece, you’ll damage the threads on the bolt. GETUHAND Cordless Impact Wrench Kit, Double Power(Battery-Powered and Corded-Electric), Digital Display,Torque Adjustable, 300 ft-lbs 400 N.M Torque,12Volts&1/2 Inch Portable Car Impact Wrench … At first, you should attach the socket to the socket to the nuts or bolts. One is slipper torque wrench. Torque wrench instruction Sears torque wrench instructions. Mumbai, Maharashtra. When the specified level of torque gained, you should release the pressure from thy torque. Lug nut/stud wheel torque chart: http://www.4diyers.com/resources/wheelstudtorquespecs.php. First, make sure that the calibration device is within the exact range. 6PAG3~ 6PAG9, 6PAH0~6PAH9, 6PAJ0~ Westward Operating Instructions and Parts Manual 6PAJ2, 10L414~10L424 Micrometer Torque Wrench General Safety Information Your torque wrench was calibrated and tested before leaving the factory and is guaranteed to meet or exceed ASME B107.14 standard. Your first step is to measure from the center of the torque wrench drive to a point on the handle. After the click point, torque is applies again, and typically producing an over tightening, depending on the operator. The hydraulic torque wrench has adjustable settings that you can set the required torque... Step-3: … If you are looking for lug nut/stud torque specifications for your vehicle, I have a large list on my website for free. Then you should attach the socket to the torque wrench. Using calibrated gauges enhances the accuracy of your hydraulic system. Once you start tightening the bolt the wrench should light up. A HTL hydraulic power pack (for use with your HTL wrench) is recommended to provide the speed, pressure, and portability that makes your HTL system efficient and accurate. Non-slip knurled aluminum handle allows for a better grip while working. Other uses should be avoided. The hydraulic torque wrench comes with three-part like a hose, a power pack, and a... Step-2: Set the torque level. You should open the screw from the wrench handle where the battery box includes. A torque wrench is very similar to a conventional ratchet wrench. It is used where to tighten or loosen the bolts or screws. TrustSEAL Verified. Please read and understand entire manual, including all safety information, before using torque wrench. A hydraulic torque wrench is an industrial power tool that is designed to exert torque with proper tightening or loosening to a large bolt or screw. A torque wrench is a special tool to operate the torque with fastener the nuts or bolts. You can see three part of click torque wrench like socket extension length, torque extension length and handle extension length. You can save the reading to the display. Reversible ratcheting head allows you to torque left and right-hand fasteners. A torque wrench sounds like a fancy tool better left in the hands of bike mechanics, but in reality, it’s a small gadget you can learn to use in minutes. The electric torque wrench is a programmable electric device that can determine the accurate torque level. It is designed with preventing overreachig overstretching to the actual point. Again this is the same principle, this too has a lock which needed to be pulled back, rotate the handle to the correctly value, and then release which will automatically lock into place. Established in the year 2016 at Thane, Maharashtra, We “Technotorc Tools Pvt. Then to setup the single value increments, the scale around the handle is needed for that. Torque Range (in/Lbs): 120 To 960 Inch/Lbs. Also for: Torque wrench 2696, Torque wrench 3293, Torque wrench 807, Torque wrench 808, 239, 807, 808, 2696, 3293. You should specify the torque level. Bluepoint Offers the state of the art technically advanced Torque wrenches from state of the art facility in USA for arriving at precise torque values when used, Bluepoint offers in Adjstable click … Make sure your hand is centered on the handle of the torque wrench. The tool was invented back in 1918 by Conrad Bahr while he was working for the New York City Water Department. All Power Torque Tools are manufactured to meet or exceed U.S. government and American National Standards Institute specifications. After that, set the wrench with 20% and again 60% of the torque range and take 5 readings for each setting. 3. Over-torque(110% of Max. of torque for greater precision when tightening screws or bolts. Users will appreciate the ergonomics of torque adjustment with manual locking in front of the handle and the fine scale graduation (1 Nm or 1 ft.lbs) of the CP torque wrenches range. To quickly confirm the torque value of manual torque wrenches. When setting the torque valve to 240 inch pound, therefore we will need to be past the 230 mark and align the handle to the 10th increment. You should not set over limit torque. Save 5% with coupon. Torque Range (ft/Lbs): 10 To 80 ft/Lbs. Established in the year 2016 at Thane, Maharashtra, We “Technotorc Tools Pvt. You read “how to use the beam, click, hydraulic and digital torque wrench. Now you can start the switch to operate the wrench set. This Tacklife HTW1A torque wrench comes with a ⅜ inch drive size that offers a decent torque range of 10-foot pounds to 80-foot pounds. Measuring/Inspection: To determine the torque of a fastener that has already been tightened. It has a serial port to be connected to a PC or printer for documentation of the achieved torque values. You do this because you don’t want to over torque the bolt. The torque applied is influenced by the wrench handling. The inch pound torque wrench does not read in foot pounds, so a simple conversion is needed. for any reason it breaks,, Power tool manuals and free pdf instructions. Clean dirty or rusted threads before tightening, but don’t lubricate them unless instructed to by the equipment manufacturer. Torque Wrench Use and Care Tips. Milwaukee MLW2861-20 … Tension and torque, of course, call for different tools. The tester features 3 measurement modes: Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m. Easy Operation. Did your Craftsman model 44595 wrenches and There are parts available for the torque wrench through the Sears PartsDirect website but I am not sure, A Tool that Works Hard on Every Job. A torque wrench is a unique tool that can be adjusted to tighten nuts and bolts to a specific torque level, which is measured in foot-pounds or meters per kilogram.

El Hombre De Jengibre Libro, Paintings In Nueva Ecija, Ananda Marga Gina Lopez, Shoulder Instability Types, Migdal Eder Sermon, Buff Cat Emoticon Copy And Paste, Iphone 8 Slow Reddit, Heavy Subsonic 10mm, Touch Lamp Portable Speaker Cl-671 Charging Time, 12th Science Biology Book In Gujarati Pdf 2020, Enderman Plush Life Size, Rdr2 Strawberry Robbery House, Chakra Hand Signs Naruto,

In these conditions

“The provider” means the agent appointed by Skipandwaste.com to deliver, exchange, or collect the hire item(s).

“The supplier” means where the context so permits, Skipandwaste.com or Skipandwaste.com’s duly
authorised agent or subcontractor.

“The hirer” means the person or company requesting provision of hire item(s) by Skipandwaste.com.

“The supply coordination” means the service Skipandwaste.com are offering to the Provider by way of coordinating the service of introducing the Hirer to the Provider, and co-ordinating the service of facilitating the disposal of waste by the Provider for the Hirer.

“The service” means the arrangement and coordination of the supply of hire item(s) by the Provider, its employees, servants, agents or subcontractors for the period of hire to facilitate the certificated and documented removal of refuse on behalf of the Hirer and the subsequent certificated and documented disposal of the contents of such hire item(s) or hire item(s) on behalf of the Hirer.

“The hire item(s)” means any hire item(s) or any other hire item(s) provided as part of the service.

“The site” means the place where the hire item(s) is deposited at the request or direction of the hirer.

“The period of hire” means the period from delivery of the hire item(s) to the hirer, to collection thereof, from the hirer or such time as collection thereof ought reasonably to have been completed by the supplier.

“Working day” shall mean Monday to Friday in any week.

“Force Majeure” means any circumstances beyond the reasonable control of either the provider or the supplier (including, without limitation thereto, any strike, lockout or other form of industrial action, accident, unprecedented locally inclement weather, difficulties in obtaining fuel parts or machinery, power failure or breakdown, or malfunction of machinery or computers.

In consideration of the provider extending credit to the hirer as named, the person signing this form hereby guarantees payment to the provider of all outstanding monies including amounts owed in excess of credit limit and any interest applicable.

Terms & Conditions for Commercial Hire

1. These conditions shall apply to all contracts for the supply of the service by Skipandwaste.com to the exclusion of all other terms and conditions and shall apply where the context so permits for the benefit of the supplier and the employees, agents and subcontractors of the provider and the supplier as if they had been parties heretofore.

2. Skipandwaste.com reserves the right to add to, alter or amend, or to the withdrawal of any of these terms or conditions without notice. Any typographical, clerical or other error, or commission in any sales literature, quotation or price list, acceptance of offer, invoice or other document or information issued by Skipandwaste.com shall be subject to correction without any liability on the part of Skipandwaste.com.

3. Any reference in these conditions to a statute or regulation, or provision thereof, shall be construed as a reference to that statute, regulation or provision as amended, re-enacted or extended at the relevant time.

4. All requests for the service shall be deemed to be an offer by the Provider to purchase the services of the supply coordinator Skipandwaste.com pursuant to these conditions and the service is offered subject to the availability of suitable hire item(s) to the provider. The Hirer agrees that they will rely wholly on their own hire item(s) and judgement in the selection of the service and will not treat any information supplied to them by the service coordinator, or Provider, as a representation, warranty or guarantee in any manner whatsoever.

5. No variation of these conditions shall be binding unless agreed in writing between the authorised representatives of Skipandwaste.com and the Hirer.

6. No variation of these conditions shall be binding unless agreed in writing between the authorised representatives of Skipandwaste.com and the Provider.

7.
a) Except as specifically otherwise agreed in writing, the provider or supplier shall be under no obligation to deposit the hire item(s) elsewhere than on a highway.

b) The Hirer agrees in all cases: –
(i) To provide and adequately maintain all necessary approach roads and sites for the purpose of the delivery.
(ii) To rely on their own skill and judgement and to satisfy themselves as to the suitability of all approach roads, tracks, or grounds, for the purposes of delivery, siting and collection of hire item(s) and to notify Skipandwaste.com at the time of ordering the service of any special requirements as to delivery.
(iii) To promptly, on the arrival of the vehicle, accept delivery and provide any necessary directions and a suitable site.
(iv) To ensure that an authorised person is present at the time of delivery to sign an acknowledgement of delivery and or collection of the hire item(s) and that such authority is signed on delivery or collection by such authorised person and not otherwise, and the Hirer agrees that any delivery or collection note signed by a person with apparent authority to do so shall be deemed to be signed by an authorised representative of the hirer and that where no such person is available to sign such proof of delivery or collection, within the stipulated time nominated by the provider at the time of placing the order, from arrival of the hire item(s) or the vehicle at the site the provider’s written confirmation of delivery shall be final and binding upon the Hirer.

c) The Hirer shall hold harmless and keep Skipandwaste.com indemnified against any claim, demand or penalty arising during the period of hire and which could not have been made had the provider not agreed to provide the service including, but not limited thereto all 3rd party claims, or claims for damages arising out of accidents related to any hire item(s) the subject of this contract.

8. i) The price for the provision of the service shall be such sum as shall from time to time be agreed between the parties and in default of agreement shall be the reasonable value of services (Quantum Meruit) which, unless otherwise agreed, shall be exclusive of VAT which shall be payable by the Hirer.
ii) Except where the Hirer has a previously approved credit account with Skipandwaste.com payment for the provision of the Service shall be made in full by the Hirer to Skipandwaste.com prior to the delivery by Skipandwaste.com of any hire item(s).
iii) Where the Hirer has an approved credit account, Skipandwaste.com shall be entitled to invoice the Hirer immediately for all the services already provided, and those which are pending; the Hirer shall pay the price for the provision of the service to Skipandwaste.com within 30 days of the date of Skipandwaste.com’s invoice. The time of payment of the price shall be of the essence of the Contract.

iv) The Hirer agrees that in the event that the Hirer shall fail to pay Skipandwaste.com’s nominated account in accordance with the terms in effect, Skipandwaste.com shall for such purposes be entitled to enter upon any premises of the Hirer, or any third party from whom waste was collected for such purposes as recovery of goods equivalent to the outstanding element of the contract.
v) Skipandwaste.com reserves the right to grant, refuse, withdraw, restrict, alter or cancel credit terms at its sole discretion. Where the Service is to be supplied over a period of time, each instalment thereof shall be treated as a separate contract and failure by Skipandwaste.com to provide any one or more instalments, shall not entitle the Hirer to treat the contract as a whole as repudiated.
vi) If the Hirer fails to make any payment on the due date then, without prejudice to any other right or remedy available to Skipandwaste.com, Skipandwaste.com shall be entitled to:
a) Cancel the contract or suspend any further deliveries to the Hirer.
b) Appropriate any payment made by the Hirer to such of the services (or the Services supplied under any other contract between Skipandwaste.com and the Hirer) as Skipandwaste.com may think fit not withstanding any purported appropriation by the Hirer; and
c) charge interest on such sum from the due date for payment at the annual rate of 4% above the base lending rate from time to time of Nat West bank plc, accruing on a daily basis and being compounded quarterly until payment is made, whether before or after any judgment and the Hirer shall pay the interest immediately on demand. Skipandwaste.com may claim interest under the Late Payment of Commercial Debts (Interest) Act 1998 per month until payment in full is made (a part of a month being treated as a full month for the purpose of calculating interest).
d) Charge the hirer’s credit and or debit card as listed on the credit card and bank reference form to bring the account back into agreed trading terms.

9. The Hirer shall ensure that the delivery site is prepared for receipt of the hired skip, and where so required to do by the Provider, direct the Driver where to deposit or pick up the hire item(s).
a) Failure by the Hirer to ensure that the site of hire is duly prepared and ready to receive, or have removed as part of the agreed service, the hire item(s) will result in a charge being applied for the amount of £100 or the total cost of the Provider’s wasted journey/visit fee, or whichever is the greater.

10. a) Where Skipandwaste.com or the Driver are requested or directed to deposit or pick up hire item(s) on, or from a site, which is off a highway; or where delivery otherwise involves the passage of the vehicle over gratings, drains, roads, pavements, forecourts, yards, asphalt areas or any like areas, Skipandwaste.com shall be under no liability whatsoever to the Hirer for any damage howsoever caused whilst the vehicle is off the highway. To the fullest extent permitted by the law, Skipandwaste.com shall not be held liable for any negligence or tort on the part of the skip provider. Without prejudice to the generality of Condition 7c) the Hirer shall subject as above, hold harmless and keep Skipandwaste.com indemnified against any claim or demand which could not have been made had the Driver not been so requested or directed. The Hirer will, in addition, compensate Skipandwaste.com or the provider for any damage to the vehicle or the hire item(s) which would not have occurred had the Driver not been so requested or directed and which is not due to any negligence on the part of the Driver.
b) If Skipandwaste.com is prevented for any reason beyond its control from delivering or collecting a hire item(s), the Hirer shall remain liable for Skipandwaste.com’s charges together with such additional sums as the Provider shall reasonably so require for the further provision of the Service.
11. The usual time allowed for depositing or picking up hire item(s) is ten minutes. If the vehicle is kept waiting longer than this after arrival the Hirer shall be liable for reasonable demurrage, as described by the Provider in their terms and conditions of usage.

12. The standard time allowed for a ‘Wait & Load’ is fifteen minutes. If the vehicle is kept waiting longer than this initial time, the hirer shall be liable for a waiting charge as described by the Provider in their terms and conditions of usage.

13. The Hirer shall ensure that all permissions required before the hire item(s) can lawfully be deposited on the site including the permission required under the Highways Act 1971 have been, or will be obtained, before they request the Provider, or direct the Driver to deposit the hire item(s) on the site; and that the said permission will be kept in force during the period of hire and where necessary for up to 3 working days thereafter. The hirer will ensure that all hire item(s) sited on the highways will be lighted and coned in accordance with the terms and conditions of the highways act and the issuing local authority’s demands.

14. The Hirer shall not move the hire item(s) from the site without the consent of the Provider and where necessary the highway authority; and in any case will undertake to notify Skipandwaste.com as soon as is reasonably possible.

15. The Hirer shall ensure:

a) That the Hirer signs a single or multiple consignment transfer note declaring the waste type and that the waste is accurately described when completing the transfer note.

b) Where the waste type does not conform to the description, as specified on the waste transfer note, or is different to that as specified at the time the hire item(s) was ordered, then charges will vary accordingly.

c) Where inert waste loads (soil/hardcore/muck) are ordered and they are found to contain other waste types, in particular mixed builder’s waste materials thus contaminating the load, the hirer will be charged accordingly for the hire tipping charges (typically £82.50 per tonne). In particular the hirer must be aware of the considerable differences in landfill tax rates. Currently £2.50/tonne for inert materials and £82.50/tonne for active waste materials.

d) Where appropriate, waste is only stored in suitable containers.

e) That no liquids, explosives, toxic, or dangerous materials including, but not limited to fibrous asbestos, solvents, minerals or greases will be placed in the hire item(s) without the written consent of the supplier; and that the contents of the hire item(s) when loaded conform to the requirements of S.I.1980/1709 or any re-enactment thereof and the local waste regulation authority with regard omits suitability for disposal as general or special waste as a controlled waste disposal site.

f) If any waste to which the said section applies is placed in any hire item(s) the Hirer will immediately give the notices required by the said section and send copies of such notices to both Skipandwaste.com and the Provider.

g) That no bonded asbestos will be placed, save where the Hirer has given to Skipandwaste.com, a minimum of seven days’ notice of their intentions so to do and obtained the written agreement of Skipandwaste.com and agreed to the charges to be made with regard thereto.

h) No cans, bottles or other liquid containers are placed in the hire item(s) unless they are dry, free from liquid, residues and open for inspection.
i) That no fridges, freezers, vehicle tyres, car/commercial vehicle batteries and any other waste types, which following changes in legislation from time to time may become classified as a special difficult, or hazardous waste type.

16. The Hirer shall ensure from the time that the hire item(s) is deposited until it is picked up again by the Provider/Supplier:-

a) It is properly sited in accordance with any relevant permission and that all conditions thereof are observed and performed at all times.

b) It is properly coned where necessary during the hours of daylight and coned and lighted during the hours of darkness.

c) No fires are lit in, and no corrosive acid or noxious substance, liquid cement or concrete placed in the hire item(s).

d) It is filled no higher than the top of its sides and in such a manner as to prevent spillage of material, both whilst the container is stationary, or in transit. Where hire item(s) are located on public or third party property and waste is accumulated for any reason whatsoever in the immediate proximity of the hire item(s), Skipandwaste.com reserves the right to supply a further hire item(s) to contain the surplus material and to transfer the same to the hire item(s) and to debit the Hirer with the reasonable costs of so doing.

e) It suffers no damage except fair wear and tear. All damage by fire, vandalism or other means, the Hirer will reimburse the Provider all costs for either replacement or repair; unless the Hirer has taken out an insurance policy with Skipandwaste.com, or provides their own insurance to cover all loss and/or damage whilst the hire item(s) are under the Hirer’s care.

f) No danger is caused by the hire item(s) or its contents to any third party and in particular, but without limitation thereto, to children.

g) No unauthorised removal of the hire item(s) shall take place by the hirer or a 3rd party contractor without the prior consent of the provider. The hirer will be debited all reasonable costs incurred in returning the hire item(s), or in cases where the hire item(s) is deemed lost or stolen the hirer will reimburse the Provider in full. Please note that many insurance policies will not cover theft of hire item(s).

17. Notwithstanding the terms of condition 15 it shall be the Hirer’s duty to notify the Provider of, and the Provider’s responsibility to ensure compliance with, any condition imposed by a highway authority relating to the marking of the hire item(s) with reflective paint.

18. Except as specifically otherwise agreed in writing the Hirer shall fill the hire item(s) within the period of hire as specified by the Provider and shall inform Skipandwaste.com in good time of its readiness for collection or replacement. The Hirer shall ensure that, from the time when collection of the hire item(s) is due to take place until the same is collected, there is left a clear space at one end of the container to terminate the hiring of the hire item(s) the minimum notice period shall be one clear working day.

19. The Provider may arrange the removal or repositioning of the hire item(s) if required at any time to do so by a highway authority or constable in uniform under Section 140 of the Highway Act 1980. The Hirer shall be responsible for the reasonable additional cost thereof on the part of the Provider or Supplier.

20. It is the responsibility of the hirer’s representative on site to keep the hirer’s copy of the ‘Proof of
Delivery’ ticket. Any copies required at a later date will be subject to a £30 administration charge.

21. Except as specifically otherwise agreed in writing, the Provider agrees to dispose of the contents of the hire item(s) as shall be in accordance with the terms of the contract. The Hirer agrees that they will pay the Provider’s reasonable charges of dealing with any of the contents of any hire item(s) which do not comply with the terms of this contract.

22. Risk and Title: The risk in relation to any hire item(s) supplied pursuant to this Contract shall pass to the Hirer upon delivery, in accordance with the Hirer’s request or direction and shall remain with the Hirer until the hire item(s) are collected by the Provider. Title shall not transfer to the Hirer under any circumstances.

23. Where the Service is provided under a consumer transaction as defined by the Consumer Transaction (Restriction on Statements) order 1976, the statutory rights of the Hirer are not affected by these conditions.

24. It is specifically provided and agreed that any compensation &/or damages payment in respect of any claim or claims arising out of, or in connection with, the terms of this contract for any reason whatsoever and howsoever arising, shall not amount in the aggregate to more than the cost of the provision of the service by the Provider, or that part of the Service giving rise to such claim, and in any event not more than £1000; and Skipandwaste.com and any other person entitled to the benefit of this contract shall have no further liability to the Hirer. Except in respect of death or personal injury caused by the negligence of Skipandwaste.com or any other person entitled to the benefit of this contract, Skipandwaste.com or such party shall not be liable to the Hirer by reason of any representation, or any implied warranty, condition or other term, or any duty at common law, or under the expressed terms of this contract, for any consequential loss or damage (whether for loss of profit or otherwise), costs, expenses or other claims for consequential or incidental compensation whatsoever (and whether caused by the negligence of Skipandwaste.com or any other party entitled to the benefit of this contract, their employees, or agents, or otherwise) which arise out of, or in connection with the supply of the service, except as expressly provided in these conditions.

25. Skipandwaste.com shall not be liable to the Hirer or be deemed to be in breach of the contract by reason of any delay in performing, or any failure to perform, any of the provider’s, supplier’s, or co-ordinator’s obligations in relation to the service, if the delay or failure was due to force majeure.

26. Insolvency of Hirer:

a) This clause applies if:

i) The Hirer makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purposes of amalgamation or
reconstruction); or ii) an encumbrance takes possession, or a receiver is appointed, or any of the property or assets of the Hirer, or

iii) The Hirer ceases or threatens to cease; to carry on business; or

iv) Skipandwaste.com reasonably apprehends that any of the events mentioned above is about to occur in relation to the Hirer and notifies to the Hirer accordingly.

b) If this clause applies, then without prejudice to any other right or remedy available to Skipandwaste.com, Skipandwaste.com shall be entitled to cancel the contract or suspend any further deliveries under the Contract without any liability to the Hirer, and if the Services have been provided but not paid for, the price shall become immediately due and payable, not withstanding any previous agreement or arrangement to the contrary.

27. Refund Policy

27.1 Application for refunds must be sent directly to Skipandwaste.com, in writing, addressed to the Customer Service Manager.

28. Cancellation Policy – Cancellation of Hire. If the hirer chooses to cancel the hire, the following charges will be levied:

More than 4 days’ notice – 10% of total hire charge

1-3 days’ notice – 50% of total hire charge

Less than 24 hours’ notice – 100% of total hire charge

Please note cancellation charges apply on all orders once instruction to deliver has been taken.

Additional Terms & Conditions for Domestic Private Hire

The hirer is responsible for ensuring the position for hire item(s) delivery has a clear access. Blocked access due to abandoned vehicles or materials resulting in failed delivery/collection will incur standing time and or an aborted delivery charge (known generally as a wasted journey fee). The Hirer is responsible for theft or damage to hire item(s) whilst on hire & until hire item(s) is removed by the hire item(s) owner.

Skipandwaste.com cannot accept any liability for any costs incurred through damage to the hirer’s driveway or other property whilst delivering or collecting the hire item(s) off the public highway.

The hire item(s) vehicle is invited off the highways onto private property at the hirer’s own risk, and is a separate arrangement to be confirmed with the Provider. Please note that we draw your attention to the fact that tarmac, block paved, and pattern-imprinted concrete driveways are at most risk.

The Hirer is also responsible for pointing out low lying cables, narrow entrance pillars, manhole covers, and any other potential risks or obstructions to Hire item(s) or the driver, prior to the hire item(s) delivery.
The local authority may require the lighting and coning of all on-road hire item(s) and, unless otherwise advised, it is necessary to obtain the necessary council consent with a road permit. Hirers should note that the fines for failure to light and cone a skip correctly vary according to the regulations set by the permit issuing authority. Hirers are advised to consult https://www.gov.uk/apply-skip-permit prior to completing the request of the hire item(s). Skipandwaste.com can assist in the facilitation of the provision of a valid permit. Please be advised that there will be an administration charge of £15 per permit/paperwork application.

In all cases delivery and collection times are given for guidance only and Skipandwaste.com accepts no liability for any costs incurred due to delays in delivery/collection; or failure to deliver on the preferred delivery date, or at the preferred time due to unforeseen circumstances. In all circumstances invoices exclude exceptional conditions such as force majeure.

In Addition to the above terms

1 INTERPRETATION

1.1 In these conditions the following words have the following meanings:
“Contract” means a contract which incorporates these conditions and made between the Customer and the Supplier for the hire of Hire Goods and/or the sale of Products;
“Customer” means the person, firm, company or other organisation hiring Hire Goods;
“Deposit” means any advance payment required by Skipandwaste.com in relation to the Hire Goods which is to be held as security by Skipandwaste.com;
“Force Majeure” means any event outside a party’s reasonable control including but not limited to acts of God, war, flood, fire, labour disputes, strikes, sub-contractors, lock-outs, riots, civil commotion, malicious damage, explosion, terrorism, governmental actions and any other similar events;
“Hire Goods” means any machine, article, tool, skip, ‘wheelie bin’ and/or device together with any accessories specified in a Contract, which are hired to the Customer;
“Hire Period” means the period commencing when the Customer holds the Hire Goods on hire (including Saturdays, Sundays and Bank Holidays) and ending upon the happening of any of the following events: the physical return of the Hire Goods by the Customer into the Provider’s possession; or the physical repossession or collection of Hire Goods by the Provider;
“Liability” means liability for any and all damages, claims, proceedings, actions, awards, expenses, costs and any other losses and/or liabilities;
“Products” means the products sold to the Customer by Skipandwaste.com; “Rental” means the Provider’s charging rate for the hire of the Hire Goods which is current from time to time during the Hire Period;
“Provider” means the appointed company arranged by Skipandwaste.com to fulfil the terms of the contract and will include its employees, servants, agents and/or duly authorised representatives;
“Services” means the services and/or work (if any) to be performed by Skipandwaste.com for the Customer in conjunction with the hire of Hire Goods including any delivery and/or collection service for the Hire Goods.

2 BASIS OF CONTRACT

2.1 Hire Goods are hired subject to them being available for hire to the Customer at the time required by the Customer. Skipandwaste.com will not be liable for any loss suffered by the Customer as a result of the Hire Goods being unavailable for hire where the Hire Goods are unavailable due to circumstances beyond Skipandwaste.com’s control.
2.2 Where hire of the Hire Goods is to a Customer who is an individual and the hire would be covered by the Consumer Credit Act 1974 the duration of the Hire Period shall not exceed 3 months, after which time the Contract shall be deemed to have automatically terminated.
2.3 Nothing in this Contract shall exclude or limit any statutory rights of the Customer which may not be excluded or limited due to the Customer acting as a consumer. For further information about your statutory rights contact your local authority Trading Standards Department or Citizen’s Advice Bureau.

3 PAYMENT

3.1 The amount of any Deposit, Rental and/or charges for any Services shall be as quoted to the Customer or otherwise as shown in Skipandwaste.com’s online quotation service. Where a Deposit is required for the Hire Goods it must be paid in advance of the Customer hiring the Hire Goods. Skipandwaste.com may also require an initial payment on account of the Rental in advance of the Customer hiring the Hire Goods.
3.2 The Customer shall pay the Rental, charges for any Services, monies for any Products and/or any other sums payable under the contract to Skipandwaste.com at the time and in the manner agreed. Skipandwaste.com’s prices are, unless otherwise stated, exclusive of any applicable VAT for which the Customer shall additionally be liable.
3.3 Payments by the Customer on time under the Contract are an essential condition of the Contract. Payment shall not be deemed to be made until Skipandwaste.com has received either cash or cleared funds in respect of the full amount outstanding.
3.4 Skipandwaste.com reserves the right to withhold payment for any requested hire item, until the appropriate certification and paperwork has been received by Skipandwaste.com. This is usually, but not limited to, Waste Transfer Note, Certification of Waste type and accurate weight thereof.

4 RISK AND TITLE OWNERSHIP AND INSURANCE

4.1 Risk in the Hire Goods and any Products will pass immediately to the Customer when they leave the physical possession or control of the Provider. Title will not transfer to the Customer in any case.
4.2 Risk in the Hire Goods will not pass back to the Provider from the Customer until the Hire Goods are back in the physical possession of the Provider. This shall apply even if the Provider has agreed to cease charging the Rental.
4.3 Ownership of the Hire Goods remains at all times with the Provider. The Customer has no right, title or interest in the Hire Goods except that they are hired to the Customer.
4.4 The Customer must not deal with the ownership or any interest in the Hire Goods. This includes but is not limited to selling, assigning, mortgaging, pledging, charging, securing, hiring, withholding, exerting any right to withhold, disposing of and/or lending.
4.5 The Provider may provide reasonably priced insurance in respect of the Hire Goods at additional cost to the Rental. Alternatively the Provider may require the Customer to insure the Hire Goods on such reasonable terms and for such reasonable risks as the Provider may specify. The proceeds of any such insurance shall be held by the Customer in trust for the Provider and be paid to the Provider on demand. The Customer must not compromise any claim in respect of the Hire Goods and/or any associated insurance without the Provider’s written consent.

5 DELIVERY, COLLECTION AND SERVICES

5.1 It is the responsibility of the Customer to collect the Hire Goods from the Provider and return them to the Provider at the end of the Hire Period. If the Provider agrees to deliver or collect the Hire Goods to and/or from the Customer it will do so at its standard delivery cost and such delivery and/or collection will form part of the Services.
5.2 Where the Provider provides Services the persons performing the Services are servants of the Customer and once the Customer instructs such person they are under the direction and control of the Customer. The Customer shall be solely responsible for any instruction, guidance and/or advice given by the Customer to any such person and for any damage which occurs as a result of such persons following the Customer’s instructions, guidance and/or advice except to the extent that the persons performing the Services are negligent.
5.3 The Customer will allow and/or procure sufficient access to and from the relevant site and procure sufficient unloading space, facilities, equipment and access to power supplies and utilities for the Provider’s employees, subcontractors and/or agents to allow them to carry out the Services. The Customer will ensure that the site where the Services are to be performed is, where necessary, cleared and prepared before the Services are due to commence.
5.4 If any Services are delayed, postponed and/or are cancelled due to the Customer failing to comply with its obligations the Customer will be liable to pay the Provider’s additional standard charges from time to time for such delay, postponement and/or cancellation except where the Customer is acting as a consumer and the delay is due to a Force Majeure event.

6 CARE OF HIRE GOODS

6.1 The Customer shall:-
6.1.1 not remove any labels from and/or interfere with the Hire Goods, their working mechanisms or any other parts of them and take reasonable care of the Hire Goods and only use them for their proper purpose in a safe and correct manner in accordance with any operating and/or safety instructions provided or supplied to the Customer;
6.1.2 Notify the Provider immediately after any breakdown, loss and/or damage to the Hire Goods;
6.1.3 Take adequate and proper measures to protect the Hire Goods from theft, damage and/or other risks;
6.1.4 Notify the Provider of any change of its address and upon the Provider’s request provide details of the location of the Hire Goods;
6.1.5 Permit the Provider at all reasonable times to inspect the Hire Goods including procuring access to any property where the Hire Goods are situated;
6.1.6 keep the Hire Goods at all times in its possession and control and not to remove the Hire Goods from the United Kingdom without the prior written consent of the Provider;
6.1.7 be responsible for the conduct and cost of any testing, examinations and/or checks in relation to the Hire Goods required by any legislation, best practice and/or operating instructions except to the extent that the Provider has agreed to provide them as part of any Services;
6.1.8 Not do, or omit to do, anything which will, or may be deemed to, invalidate any policy of insurance related to the Hire Goods, which is notified to the Customer;
6.1.9 not continue to use Hire Goods where they have been damaged and will notify Skipandwaste.com and the Provider immediately if the Hire Goods are involved in an accident resulting in damage to the Hire Goods, other property and/or injury to any person; and
6.1.10 where the Hire Goods require fuel, oil and/or electricity ensure that the proper type and/or voltage is used and that, where appropriate, the Hire Goods are properly installed by a qualified and competent person.
6.2 The Hire Goods must be returned by the Customer in good working order and condition (fair wear and tear excepted) and in a clean condition together with all insurance policies, licences, registration and other documents relating to the Hire Goods.

7 BREAKDOWN

7.1 The Provider will at its own cost carry out all routine maintenance and repairs to the Hire Goods during the Hire Period and all repairs which are required due to fair wear and tear and/or an inherent fault in the Hire Goods. The Customer will be responsible for the cost of all repairs necessary to Hire Goods during the Hire Period which arise otherwise than as a result of fair wear and tear, an inherent fault and/or the negligence of the Supplier while carrying out routine maintenance and/or repairs.
7.2 The Customer must not repair or attempt to repair the Hire Goods unless authorised to do so in writing by Skipandwaste.com or the Provider.

8 LOSS OR DAMAGE TO THE HIRE GOODS

8.1 If the Hire Goods are returned in damaged, unclean and/or defective state except where due to fair wear and tear and/or an inherent fault in the Hire Goods the Customer shall be liable to pay the Provider for the cost of any repair and/or cleaning required to return the Hire Goods to a condition fit for re-hire and to pay the Rental, in accordance with the provisions of clause 8.3, until such repairs and/or cleaning have been completed.
8.2 The Customer will pay to the Provider the replacement cost of any Hire Goods which are lost, stolen and/or damaged beyond economic repair during the Hire Period less the amount paid to the Provider under any policy of insurance taken out in accordance with these conditions.
8.3 The Customer shall pay the Rental for the Hire Goods up to and including the date it notifies Skipandwaste.com that the Hire Goods have been lost, stolen and/or damaged beyond economic repair. From that date until Skipandwaste.com has replaced such Hire Goods the Customer shall pay, as a genuine pre-estimate of lost rental profit, a sum as liquidated damages being equal to two thirds of the Rental that would have applied for such Hire Goods for that period. Skipandwaste.com shall use its reasonable commercial endeavours to purchase replacements for such Hire Goods as quickly as possible using the monies paid under clause 8.2 above.

9 TERMINATION BY NOTICE

9.1 If the Hire Period has a fixed duration, subject to the provisions of Section 10 neither the Customer nor Skipandwaste.com shall be entitled to terminate the Contract before the expiry of that fixed period unless agreed with the other party.
9.2 If the Hire Period does not have a fixed duration either of the Customer or Skipandwaste.com is entitled to terminate the Contract upon giving to the other party any agreed period of notice.
9.3 If no period of notice has been agreed or specified the Customer may terminate the Hire Period by the physical return of the Hire Goods to the Provider and Skipandwaste.com shall be entitled to terminate the hire of the Hire Goods by giving not less than 14 days’ notice to the Customer.

10 DEFAULT

10.1 If the Customer:-
10.1.1 Fails to make any payment to Skipandwaste.com when due without just cause;
10.1.2 breaches the terms of the Contract and, where the breach is capable of remedy, has not remedied the breach within 14 days of receiving notice requiring the breach to be remedied;
10.1.3 Persistently breaches the terms of the Contract;
10.1.4 provides incomplete, materially inaccurate or misleading facts and/or information in connection with the Contract;
10.1.5 pledges, charges or creates any form of security over any Hire Goods, or ceases or threatens to cease to carry on business, or proposes to compound with its creditors, applies for an interim moratorium in respect of claims and/or proceedings, any distress, execution or other legal process is levied on any property of the Customer, has a Bankruptcy Petition presented against it or the Customer takes or suffers any similar action in any jurisdiction;
10.1.6 being a company, enters into voluntary or compulsory liquidation, has a receiver, administrator or administrative receiver appointed over all or any of its assets, any attachment order is made against the Customer, any distress, execution or other legal process is levied on any property of the Customer or the Customer takes or suffers any similar action in any jurisdiction;
10.1.7 appears reasonably to Skipandwaste.com due to the Customer’s credit rating to be financially inadequate to meet its obligations under the Contract; and/or
10.1.8 appears reasonably to Skipandwaste.com to be about to suffer any of the above events; then Skipandwaste.com shall have the right, without prejudice to any other remedies, to exercise any or all of the rights set out in clause 10.2 below.

10.2 If any of the events set out in clause 10.1 above occurs in relation to the
Customer then:-
10.2.1 Except where the Customer is acting as a consumer, Skipandwaste.com may enter, without prior notice, any premises of the Customer (or premises of third parties with their consent) where Hire Goods owned by Skipandwaste.com may be and repossess any Hire Goods;
10.2.2 Skipandwaste.com may withhold the performance of any Services and cease any Services in progress under this and/or any other Contract with the Customer;
10.2.3 Skipandwaste.com may immediately cancel, terminate and/or suspend without Liability to the Customer the Contract and/or any other contract with the Customer; and/or
10.2.4 All monies owed by the Customer to Skipandwaste.com shall immediately become due and payable.

10.3 Any repossession of the Hire Goods shall not affect Skipandwaste.com’s right to recover from the Customer any monies due under the Contract and/or any damages in respect of any breach which occurred prior to repossession of the Hire Goods.

10.4 Upon termination of the Contract the Customer shall immediately:
10.4.1 return the Hire Goods to Skipandwaste.com and/or Skipandwaste.com’s nominated Provider; or make the Hire Goods available for collection by Skipandwaste.com’s nominated Provider as requested by the Provider; and
10.4.2 Pay to Skipandwaste.com all arrears for Rentals, Charges for any Services, monies for any Products and/or any other sums payable under the Contract.

11 LIMITATIONS OF LIABILITY

11.1 All warranties, representations, terms, conditions and duties implied by law relating to fitness, quality and/or adequacy are excluded to the fullest extent permitted by law.
11.2 If Skipandwaste.com is found to be liable in respect of any loss or damage to the Customer’s property the extent of Skipandwaste.com’s Liability will be limited to the retail cost of replacement of the damaged property.
11.3 Any defective Hire Goods must be returned to Skipandwaste.com’s nominated Provider for inspection if requested by Skipandwaste.com’s nominated Provider, before Skipandwaste.com’s nominated Provider will have any Liability for defective Hire Goods.
11.4 Skipandwaste.com shall have no Liability to the Customer if, without just cause, any monies due in respect of the Hire Goods and/or the Services has not been paid in full by the due date for payment.
11.5 Skipandwaste.com shall have no Liability for additional damage, loss, liability, claims, costs or expenses caused, or contributed to, by the Customer’s continued use of defective Hire Goods and/or Services after a defect has become apparent, or suspected, or should reasonably have become apparent to the Customer.
11.6 The Customer shall give Skipandwaste.com a reasonable opportunity to remedy any matter for which Skipandwaste.com is liable, before the Customer incurs any costs and/or expenses in remedying the matter itself. If the Customer does not do so Skipandwaste.com shall have no Liability to the Customer in this regard.
11.7 Skipandwaste.com shall have no Liability to the Customer to the extent that the Customer is covered by any policy of insurance arranged as a result of the Contract and the Customer shall ensure that the Customer’s insurers waive any and all rights of subrogation they may have against Skipandwaste.com.
11.8 Skipandwaste.com shall have no Liability to the Customer for any:-
11.8.1 Consequential losses (including loss of profits and/or damage to goodwill and/or reputation);
11.8.2 Economic and/or other similar losses;
11.8.3 Special damages and indirect losses; and/or
11.8.4 Business interruption, loss of business, contracts and/or opportunity.

11.9 Skipandwaste.com’s total Liability to the Customer under and/or arising in relation to any Contract shall not exceed 5 times the amount of the Rental and charges for Services (if any) under that Contract or the sum of £1,000 whichever is the higher. To the extent that any Liability of Skipandwaste.com to the Customer would be met by any insurance of Skipandwaste.com, then the Liability of Skipandwaste.com shall be extended to the extent that such Liability is met by such insurance.

11.10 Each of the limitations and/or exclusions in this Contract shall be deemed to be repeated and apply as a separate provision for each of:
11.10.1 Liability for breach of contract;
11.10.2 Liability in tort (including negligence); and
11.10.3 Liability for breach of statutory and/or common law duty; except clause 11.9 above, which shall apply once only in respect of all the said types of Liability.

11.11 Nothing in this Contract shall exclude or limit the Liability of Skipandwaste.com for death or personal injury due to Skipandwaste.com’s negligence, nor exclude or limit any other type of Liability which it is not permitted to exclude or limit as a matter of law.

12 GENERAL

12.1 Upon termination of the Contract the provisions of clauses 3.2, 3.4, 3.5, 8.1, 8.2, 8.3 and Section 6 shall continue in full force and effect.

12.2 Each hire of an item of Hire Goods shall form a distinct Contract which shall be separate to any other Contract relating to other Hire Goods.

12.3 The Customer shall be liable for the acts and/or omissions of its employees, agents, servants and/or subcontractors as though they were its own acts and/or omissions under this Contract.

12.4 The Customer agrees to indemnify and keep indemnified Skipandwaste.com against any and all losses, lost profits, damages, claims, costs (including legal costs on a full indemnity basis), actions and any other losses and/or liabilities suffered by the Supplier and arising from or due to any breach of contract, any tortuous act and/or omission and/or any breach of statutory duty by the Customer.

12.5 No waiver by Skipandwaste.com of any breach of this Contract shall be considered as a waiver of any subsequent breach of the same provision, or any other provision. If any provision is held by any relevant competent authority to be part of the validity of the other provisions of this Contract and the remainder of the affected provision shall be unaffected and shall remain in full force and effect.

12.6 Skipandwaste.com shall have no Liability to the Customer for any delay and/or non-performance of a Contract to the extent that such delay is due to any Force Majeure events. If Skipandwaste.com is affected by any such event then time for performance shall be extended for a period equal to the period that such event or events delayed such performance.

12.7 All third party rights are excluded and no third parties shall have any rights to enforce the Contract.

This shall not apply to any finance company with whom Skipandwaste.com has an outstanding finance agreement relating to the Hire Goods. Such finance company shall, subject to Skipandwaste.com’s consent, have the right to enforce this Contract as if they were the Supplier. This Contract is governed by and interpreted in accordance with English law and the parties agree to submit to the non-exclusive jurisdiction of the English courts.

13 ADDITIONAL CONDITIONS

13.1 Skipandwaste.com may insert and present for payment any balance due and unpaid where the Customer has signed a blank or nil value debit or credit card voucher. The Supplier may also process interim payments by credit or debit card at any stage of the Contract.